ViewEra V151 User Manual

TFT-LCD VIDEO MONITOR TFT-LCD SECURITY MONITOR USER MANUAL V151HV/ V172SV/ V191HV Video Series and V151BN/ V172BN/ V191BN Security Series

9 b. Press UP or DOWN to increase or decrease the contrast of the display. Then press “1” to confirm the adjustment and back to OSD

10 3) Sharpness a. Press UP or DOWN to move the highlight to Sharpness and press “1” to enter. b. Press UP or DOWN to increase or decrease the

11 4) Color Temperature a. Press UP or DOWN to move the highlight to Color Temperature and press “1” to enter. b. Press “1” to select preset co

12 5) User RGB If User is selected, press UP or DOWN to move the highlight to Red, and then press “1” to enter the adjustment of Red, which is done b

13 6) Image Press “1” to get the OSD, press “1” then UP or DOWN to move the highlight to Image menu, and then press “1” to enter Image sub-menu. Then

14 b. Press UP or DOWN to adjust the horizontal position. Then press “1” to confirm the adjustment and back to Image menu. 6.3) V Position

15 b. Press UP or DOWN to move the vertical position of OSD . Then press “1” to confirm the adjustment and back to Image menu. 6.4) Phase a. Press

16 b. Press UP or DOWN to adjust the phase of signal. Then press “1” to confirm the adjustment and back to Image menu. 6.5) Clocks a. Press UP or

17 b. Press UP or DOWN to adjust the clock of signal. Then press “1” to confirm the adjustment and back to Image menu.

18 3.2.1 Audio menu Press “1” to get the OSD, press UP or DOWN to move the highlight to Audio menu, and then press “1” to enter Audio adjustment, whi

1 Table of Contents EMC Compliance …………………..……………………………………………………….……...2 Important Precautions ...

19 3.2.2 Feature Controls Press “1” to get the OSD, press UP or DOWN to select Feature Controls menu, and then press “1” to enter Feature Controls s

20 3) OSD Controls Press UP or DOWN to move the highlight to OSD Controls and press “1” to enter. There are three options under OSD Controls: OSD

21 b. Press UP or DOWN to adjust the horizontal position of OSD menu. Then press “1” to confirm the adjustment and back to OSD Controls sub-me

22 b. Press UP or DOWN to adjust the vertical position of OSD menu. Then press “1” to confirm the adjustment and back to OSD Control sub-menu.

23 3.4) OSD Timer a. Press UP or DOWN to move the highlight to OSD Timer and press “1” to enter. b. Press “1” to adjust the leng

24 3.3.1 Video menu Press “1” button to get the OSD, then press “1” to enter the Video adjustment. Press UP or DOWN to move the highlight to Video su

25 4. Dead Pixel Policy Dead pixels on the TFT LCD panel are sometimes inevitable. ViewEra guarantees that the monitor will be replaced if the number

26 7. Troubleshooting 1) No image  Check if you are using the standard power adapter coming with the monitor.  Check if the power cord is secure

2 EMC COMPLIANCE This device has been tested and found to comply with the standards for a class B digital device, pursuant to Part 15 of FCC Rules. T

3 IMPORTANT PRECAUTIONS 1. Before using this device, please read all the instructions in this manual carefully. 2. Please keep the manual carefully f

4 Introduction General Thank you for purchasing ViewEra’s LCD monitor which incorporates high quality display, multiple video inputs, and power-sav

5 2. Installation The monitor is equipped with an automatic sensing AC power adapter for a voltage range from 100 to 240 VAC at a frequency

6 2.5 Power on Turn on your monitor and computer. The LED indicator will light green when the screen is under normal condition. If the LED indicator l

7 3. User Controls 3.1 Control buttons (c) (d) (e) (f) (a), (b) a.) Power button It is used to turn on or off monito

8 3.2 OSD menu in VGA mode Press “1” button to enter the OSD main menu. See the Figure as below. Press “1” then press UP or DOWN to move the highligh